Search
Product Categories
NOTE: Indicated PRICES and/or PROMOS on this website are applicable to Metro Manila only.
GST102A
- Description
- Specifications
Conventional Fire Alarm Panel GST-102A
GST102A series Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2 & EN54-4 standard. It's compatible with GST conventional detectors, manual call points and sounders. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch.
Features
- Connecting with conventional detectors and manual call points, generating alarm in case of fire, to save human life.
- Every detection zone can have at most 15 conventional detectors. The total number of detectors and call points in a zone shall not exceed 32.
- Sounder outputs, Alarm output and Fault output are available for connecting into other systems.
- Integrated charger and battery management program, fully comply with latest EN54-4 standard requirement.
- Easy operation to enable/disable zones, sounder outputs and alarm output.
- Alarm Test function selectable with or without sounder notification.
- Output programmable for interlink between zones and sounder outputs, alert or evacuate tone, with or without delay.
- Day/Night mode selectable.
- Different Silence/Reset/Test modes can be selected to meet local requirement.
- Three access levels settable via key control.
- Reserved repeater panel interface for fire alarm indication of multiple zones.
| Name | Details |
| Operating voltage | 220/230VAC ± 15% , 50/60Hz |
| Operating Current | 0.35A |
| Standard | EN 61000-6-3 EN 61000-3-2 EN 61000-3-3 EN 50130-4 EN 54 part 2 and part 4 |
| Approval | LPCB |
| Operating Environment | 0°C to 40°C 95% relative humidity |
| Standby Batteries | 7AH/24VDC |
| Output Voltage | 20VDC to 28 VDC |
| Alarming Resistance | 150Ω-1.5KΩ ( nominal 470Ω) |
| End of Line | 4.7KΩ or AEOL ( Active End of Line) |
| Sounder Output | QTY: 4 (2 for GST102A) Active Mode: 20VDC ~ 28VDC, Output current: 300mA Relay Mode: NO/NC Contact, 1A/24VDC |
| Fire Alarm Output | QTY: 1 Active Mode: 20VDC ~ 28VDC, Output current: 300mA Relay Mode: NO/NC Contact, 1A/24VDC |
| Fault Output Capacity | QTY: 1 Passive contact output :1A/24VDC |
| Aux. Power Output | 20VDC ~ 28VDC , 500mA |
| Application | Indoor use |
| Dimension | 380mm x 320mm x 103mm |
| Model | GST102A | GST104A | GST108A | GST116A |
| Detection Zones | 2 | 4 | 8 | 16 |
| Sounder Outputs | 2 | 4 | 4 | 4 |